YB32 四柱雙動油壓機

產品分類 : 四柱雙動油壓機系列

產品咨詢返回列表

四柱雙動油壓機系列
FOUR-COLUMN DOUBLE-ACTION HYDRAULIC PRESS SERIES
本機是我廠專為鋁制品廠及不銹鋼制品廠制造的專用油壓機，特別適用于鋁質薄板拉伸和鋁制品的壓制成形及不銹鋼制品壓制成型。
技術性能設有:
1.活動橫梁二段速度控制: 空載快速、工進慢速靠模、拉伸。
2.主缸、壓邊缸具有上下限位保護，上下限程位置設定簡單、方便、快捷。
3.安全保護裝置，自動計數功能。
4.低能耗，高效率，機款新穎。
This machine is a hvdraulic press snecialy manufa ctured by the compay for the manufacturers of alumium products and stain ess stee products. especialysuitable for the stretching of aluminum sheet and the pressing and molding of aluminum products and stainless steel productsYB2 seres four-column double-action hvdralic press is designed and manufactured based on the improvement of the orgina yB32 series. Compared witrYB32 series, it has the following characteristics bevond the original technical performance:1. Compared with the same-tonnage machine, the oil cylinder stroke is longer and the workbench is larger.2. The no-load moving speed is higher. 3, lt has two stretching speeds: rapid stretching and normal stretching. 4. The whole machine runs more smoothly with more stable performance.

多項更新設計使機器性能更進一步，例如:
A number of updated designs further improve the performance of the machine, such as.
本機是我廠專為鋁制品廠及不銹鋼制品廠制造的專用油壓機，特別適用于鋁質薄板拉伸和鋁制品的壓制成形及不銹鋼制品壓制成型。

1.下缸柱塞改用鍍硬鉻鋼件加耐磨環結構，避免了柱塞崩裂問題
2.下缸密封圈采用進口組合圈，可以使用十五年以上不用更換。
3.立柱、活塞桿均采用中頻熱處理，表面鍍硬鉻。
4.退料缸可單獨點動控制。
5.液壓系統采用插裝閥，插裝閥通道大、流量大、速度快、噪音小、發熱量低
6.電器控制改用微電腦型單片機，該系統優點是 24V 的安全控制電壓，里面沒有中間繼電器、無觸點，全電腦芯片穩定性能高，使用壽命長，操作簡單。
7.大范圍的光柵安全保護裝置。

1. The plunger of the lower cylinder adopts the structure combining the hard chromium platedsteel and wearing ring, which avoids the problem of plunger cracking.
2. The lower cylinder sealing ring adopts the imported combined ring, which can be used formore than fifteen years without replacement.
3. The column and piston rod are heat treated at medium frequency, and the surface is platedwith hard chromium.

4. The discharging cylinder can be controlled by inching separately.
5. The hydraulic system adopts the cartridge valve, which has large channel, large flow, highspeed, low noise and low calorific value.
6. The electrical control adopts the single chip microcomputer, which has the advantages of24V safe control voltage, no intermediate relay and no contact. The whole computer chip hashigh stability, long service life and simple operation.
7. A wide-range grating safety protection device